L2053XA功率传感器

主要特性与技术指标

频率范围为 10 MHz 至 33 GHz

LAN 连通性及宽广的动态范围（-70 至 +26 dBm），适用于小信号测量

50,000 个读数/秒的快速实时测量

高达 1 MB 的深存储器和高达 1 MSa/s 的可变采样率

以零静寂时间进行实时测量，可确保对每一个连续脉冲都加以测量

平均模式时间选择性功能能够利用整个动态范围执行平均功率测量和选定时间间隔的平均功率测量

内置归零和自动校准功能可以节省测量时间，降低测量不确定度

使用 BenchVue 软件，可以轻松开始测量

描述

Keysight U2040/53/63 和 L2050/60 X 系列宽动态范围功率传感器能够精确地测量各种调制信号的功率。此类 USB/LAN 功率传感器拥有 -70 至 +26 dBm 的宽广动态范围，可对各种调制信号执行高精度和可重复的功率测量，其测量速度高达 50,000 个读数/秒，可以实现更高的生产吞吐量。内置归零和校准功能有助于用户节省测量时间和降低测量不确定度。U2040/53/63 和 L2050/60 X 系列功率传感器可以获得 Keysight BenchVue 软件的支持。BenchVue 软件使您无需编程，便可轻松控制功率计以记录数据，并通过广泛的显示选项显示测量结果。只需将此传感器连接至安装有 BenchVue BV0007B 功率计/传感器控制和分析应用软件的计算机，便可执行平均功率测量和分析。

Main features and technical indicators

The frequency range is 10 MHz to 33 GHz

LAN connectivity and wide dynamic range (-70 to +26 dBm) for small signal measurements

Fast real-time measurement of 50,000 readings/SEC

Up to 1 MB of deep memory and up to 1 MSa/s of variable sampling rate

Real time measurement at zero quiet time ensures that each continuous pulse is measured

The average mode time selection function can perform average power measurements and average power measurements for selected time intervals across the entire dynamic range

Built-in zeroing and automatic calibration functions can save measurement time and reduce measurement uncertainty

BenchVue software makes it easy to start measuring

describe

Keysight u2040/53/63 and l2050/60 X series wide dynamic range power sensors can accurately measure the power of various modulated signals. With a wide dynamic range of -70 to +26 dBm, this USB/LAN power sensor can perform high-precision and repeatable power measurements for a variety of modulated signals at a speed of up to 50,000 readings per second, enabling higher production throughput. Built-in zeroing and calibration functions help users save measurement time and reduce measurement uncertainty. The u2040/53/63 and l2050/60 X series power sensors are supported by Keysight BenchVue software. BenchVue software allows you to easily control the power meter to record data without programming and display measurements with a wide range of display options. The BenchVue BV0007B power meter/sensor control and analysis application software is installed on a computer to perform the average power measurement and analysis.